Menú
Carrito

DETECTOR GAS-MONÓXIDO DE CARBONO VETUS

DETECTOR GAS-MONÓXIDO DE CARBONO VETUS
DETECTOR GAS-MONÓXIDO DE CARBONO VETUS
  • Disponibilidad: Disponible
  • Modelo: DE-GD1000
433,37€
492,47€
Sin IVA: 358,16€

DETECTOR GAS-MONÓXIDO DE CARBONO VETUS

Ofrece un sistema de detección de gas para una gama de gases combustibles incluyendo: propano, butano, metano e hidrógeno, también alerta de la presencia del monóxido de carbono.Se suministra con 1 sensor que puede detectar todos los gases inflamables mencionados antes.

The VETUS gas detector model GD1000 offers a gas detection system for a range of combustible gases including propane, butane, methane and hydrogen. In addition it will also detect poisonous carbon monoxide. A single sensor is supplied as standard, which can detect both flammable gases (such as bottled gas) and carbon monoxide. A second sensor can be fitted as an option, for gas detection in an alternative location. A push button will manually actuate a remote solenoid operated cooking gas supply valve, if this is installed in the system. If this solenoid valve is in the open position (or not fitted), the presence of gas is detected continuously. If the valve is closed, detection will take place intermittently. Please note, the valve itself is not supplied with the gas detector. If the gas detector senses high concentrations of flammable gases and/or carbon monoxide, it will trigger an acoustic alarm and a LED on the control panel. Petrol fumes can trigger the alarm at extremely low concentrations, which makes this device less suitable for boats with a petrol engine(s). The “Mute” button will silence the alarm. The gas detector is provided with three switched connections rated at 1 Amp each. In the event of an alarm situation, these will actuate (if fitted), an extraction ventilator, an external alarm or horn and close a solenoid operated cooking gas supply valve. The extraction ventilator can also be operated manually by means of the “Fan” button. Should the supply voltage drop too low, an acoustic alarm will be triggered and the LED on the control panel will flash. A test function confirms the correct functioning of the gas sensor(s), as well as the three switched connections for the ventilator, external alarm and gas valve. A LED on the sensor indicates when it has reached its maximum life span and should be replaced.

• Voltage: 12 or 24 Volt D.C.
• Maximum relay contact ratings for extractor fan, gas solenoid valve and external alarm: 1 A for each function
• Control panel dimensions: 85 x 85 mm
• Built-in depth: 40 mm
• Sensor: 35 x 26 x 62 mm high

Escribe una reseña

Por favor, iniciar sesión o registrarse para revisar